sunflagsteel logo

Sinter Plant

Sinter Plant (SINTER):  A 33 M2 sinter plant, designed by Beijing Sino-Steel Industry & Trade Group Corp.(SSIT) and Jiangsu Province Metallurgical Designing Institute (JSMDI) Co. Ltd. The technology is based on principle of economical, applicable safe and operational. The annual production is 3,64,000 Tonnes.

Mini Blast Furnace (MBF)

Mini Blast Furnace (MBF):  A Blast furnace of working volume 350 M3 designed by MECON Ltd. to produce 3,00,000 MT/annum of basic grade hot metal has been installed and successfully commissioned. The hot metal is mainly used in the steel melting shop as a raw material and surplus hot metal poured in pig casting machine. The Pig casting machine is designed by KBS Paramount & capacity 800 Tonnes per day (TPD).

The Blast furnace gas is used for stoves heating, heating of preheating furnace of bar and section mill, heating of boiler ,sinter plant. Slag which is a byproduct is mainly sold to cement plants.

 
mini blast

Direct Reduction Plants 

Direct Reduction Plants (DRP):  Based on Krupp’s Codir process. The DRPs can produce 2,62,000 tones per year of Sponge iron from iron ore and coal. Additionally, the flue gases help generate 30 MW of Electric power.

 

Power Plant

Power Plant (PP): A 30 MW Captive Power Plant is having two turbine set and two boilers. One boiler operates on the flue Gas from the Sponge Iron Plant (Direct Reduction Plant) and the other uses fine coal with fluidized Bed process.

 

EAF

Electric Arc Furnace

Electric Arc Furnace (EAF): A Mannesmann Demag make 55 Mt. 40 MVA. Ultra-high power, Eccentric bottom tapping, water-cooled sides & roofs, Auto control, Oxy assisted Melting by side wall blowing etc.

Input – Hot Metal from Mini Blast Furnace, Continuous Sponge Iron feeding, Plant returns scrap.
Output – Molten Steel for Secondary Steel Refining.

Ladle Heating Furnace

Ladle Heating Furnace (LHF): No. of Furnaces – 02 No.
Make – Mannesmann Demag, Doshi Industries.
Capacity – 55 MT.
Rating – 9 & 11 MVA.
Features – Continuous Alloy Feeding System, Use of C, S, Al wires for close chemistry control, Ar gas Purging.

Electro Slag Remelting (ESR)

Electro Slag Remelting (ESR)

Product Range: 1.8MT to 22MT

Features:

  • Pre-defined profiles for various stages of processing e.g. slag resistance setpoint profile or swing setpoint profiles.
  • Digital Operator interface and data acquisition system.
  • Furnace head provided with x-y angular corrections of an electrode and total sealed system for argon shielded melting.
  • Fume exhaust and environment protection hood.
  • Fully coaxial high current feeding system.

Ingot Casting

Ingot Casting: With Modem facilities already existing for refining, degassing, and continuous casting of steel, Sunflag considered it is important to widen the current product mix to cater to the needs of specific application segments where ingots are preferred over continuous cast blooms. 

 Accordingly, Sunflag has commissioned a new setup for casting Wide End Up — Bottom Poured Ingots, Our ingot casting facility is capable of producing steel for critical applications like Tool 8L Die, Railways, Defence and Aerospace sector.

 

VAR

Vacuum Arc Remelting

Vacuum Arc Remelting

Product Range: 2MT to 16MT

Features:

  • Digital Operator interface and data acquisition system.
  • Furnace head provided with x-y angular corrections of an electrode and total sealed system for argon shielded melting.
  • Fume exhaust and environment protection hood.
  • Fully coaxial high current feeding system.
  • Ultimate vacuum level of 1×10-3 mbar

Vacuum Induction Melting

Product Range: 1MT to 6MT

Features:

  • Furnace equipped with mould height 4000MM
  • Facility for Rapid exchange of crucible
  • Multiple mould pouring.
  • Fully Rollaway head for facilitating cleaning of melt chamber
  • Ultimate vacuum level of 1×10-4 mbar

ECT For Bars

Acceptance Criteria

Minimum defect depth and length (FBH)

  • 0.7 mm FBH from 15—60 mm dia
  • 1.2 mm FBH above 60 dia

 
Minimum defect depth and length (SDH)

  • 0.5 mm x 10 mm {from 15—120 mm dia)
  • 0.3 mm SDH sensitivity can deduced by
    extrapolation depending on material SNR.

Phased Array Auto Ultrasonic Testing Salient Features

Phased Array Technology

Phased Array testing is a specialized type of ultrasonic testing that uses sophisticated multi- element array transducers and powerful instrumentation/software to steer ultrasonic beams through the test piece and map returning echoes.

No rotating movement, only electronic scanning is done:

  • Depth focalization for bar volume inspection (LW)
  • Electronic steering for bar surface inspection (SW)

Quality Highlights:

Capacity — 15 to 120 mm dia. Full bar volume inspection

Sunflag R&D Lab Is Equipped With Following State Of The Art Equipment

  • Scanning Electron Microscope with Energy Dispersive X—Ray Spectroscope (SEM—EDS) of Make — JOEL
  • Immersion Ultrasonic Testing Facility of Make — Olympus / Blue Star
  • Optical Microscope with Automatic Multiaxis stage Movement and Image Analysis software
  • Micro—hardness tester
  • Ferritometer
  • NABL Certified Testing Lab
  • R & D Centre Recognised DSIR Government of India

Scanning Electron Microscope With Eds

  • Key Function

– Microstructure analysis
– Quantitative 8L qualitative Analysis of Inclusions

  • Failure Analysis
  • Fractography
  • Inclusion with quantitative elemental analysis

Salient Features

Dimension of samples that can be tested :

– Round Bars :

  • Size 15-120 mm die.
  • Length 800mm
  • Round Corner Square Bars:
  • Size 60420 mm

UST Prob: 10 MHz — 6mm As Per Sep 1927